[rsyslog] autoconf support for atomic operations

[Rainer Gerhards]

Lorenzo and all,

much quicker than I expected, I found one quirk that could - though very
unlikely - be at the root of all these problems. I have done a first
fix, which can be found here:

http://git.adiscon.com/?p=rsyslog.git;a=commitdiff;h=4c96ebdcfe075e80810b01257cf21ea1c9b3ec0e

I'd appreciate if you could pull the helgrind branch and see if
something changes. If you can't pull it for whatever reason, a snapshot
is available via the gitweb:

http://git.adiscon.com/?p=rsyslog.git;a=snapshot;h=4c96ebdcfe075e80810b01257cf21ea1c9b3ec0e;sf=tgz

Rainer

On Thu, 2008-09-18 at 11:08 +0200, Lorenzo M. Catucci wrote:
> Rainer,
>  	I cloned your repo with
> 
> $ git clone http://git.adiscon.com/git/rsyslog.git rsyslog.git
> 
> now, I'm completely clueless about git, but I'm unable to find the 
> helgrind branch with
> 
> $ git branch -r
> 
> I tried doing a git pull, but all I got was an "Already up-to-date." 
> reply...
> 
> Should I simply wait for the helgrind branch to get merged into master, or 
> there is some way to pull the new branch here?
> 
> Thank you very much, yours
> 
>  	lorenzo
> 
> 
> +-------------------------+----------------------------------------------+
> |   Lorenzo M.  Catucci   | Centro di Calcolo e Documentazione           |
> | catucci at ccd.uniroma2.it | Università degli Studi di Roma "Tor Vergata" |
> |                         | Via O. Raimondo 18 ** I-00173 ROMA  ** ITALY |
> |  Tel. +39 06 7259 2255  | Fax. +39 06 7259 2125                        |
> +-------------------------+----------------------------------------------+
> 
> On Thu, 18 Sep 2008, Rainer Gerhards wrote:
> 
> > Yes, looks like it works. This is what I did:
> >
> > http://git.adiscon.com/?p=rsyslog.git;a=commitdiff;h=988989e49ef8639123c
> > 83383ba256c4e67679c8d
> >
> > Comments are appreciated.
> >
> > Rainer
> >
> >> -----Original Message-----
> >> From: rsyslog-bounces at lists.adiscon.com [mailto:rsyslog-
> >> bounces at lists.adiscon.com] On Behalf Of Rainer Gerhards
> >> Sent: Thursday, September 18, 2008 10:35 AM
> >> To: rsyslog-users
> >> Subject: Re: [rsyslog] autoconf support for atomic operations
> >>
> >> Hold on... I should have searched first, then asked. Looks like I
> > found
> >> a solution. Will post more later.
> >>
> >> Rainer
> >>
> >>> -----Original Message-----
> >>> From: rsyslog-bounces at lists.adiscon.com [mailto:rsyslog-
> >>> bounces at lists.adiscon.com] On Behalf Of Rainer Gerhards
> >>> Sent: Thursday, September 18, 2008 10:15 AM
> >>> To: rsyslog-users
> >>> Subject: [rsyslog] autoconf support for atomic operations
> >>>
> >>> Hi all,
> >>>
> >>> in my effort to get a clean helgrind output (and to solve the
> >> stability
> >>> problems that recently showed up, I am going to re-enable support
> > for
> >>> atomic operations). Unfortunately, the following post is still
> >> correct
> >>> and I do not know how to use autotools to check for the ability of
> >>> atomic operations:
> >>>
> >>> http://lists.adiscon.net/pipermail/rsyslog/2008-April/000728.html
> >>>
> >>> While the post contains a potentially good pointer to a solution, I
> >> do
> >>> not know how to apply it to rsyslog ;) If anyone could lend me a
> >>> helping
> >>> hand, that would be great. In the meantime, I'll simply go and make
> > a
> >>> --enable-atomic ./configure switch - that's IMHO the best solution
> >>> given
> >>> the current state of affairs.
> >>>
> >>> Rainer
> >>> _______________________________________________
> >>> rsyslog mailing list
> >>> http://lists.adiscon.net/mailman/listinfo/rsyslog
> >> _______________________________________________
> >> rsyslog mailing list
> >> http://lists.adiscon.net/mailman/listinfo/rsyslog
> > _______________________________________________
> > rsyslog mailing list
> > http://lists.adiscon.net/mailman/listinfo/rsyslog
> >
> _______________________________________________ rsyslog mailing list http://lists.adiscon.net/mailman/listinfo/rsyslog