[rsyslog] if %FROMHOST% == '???' then %FROMHOST% == %IP%

Michael Maymann michael at maymann.org
Fri Feb 3 17:22:54 CET 2012


Perfect...:-) !

Hi Rainer: No problem. Taking this back to the original thread...

Have a nice weekend :-) !


Br.
~maymann

2012/2/3 Rainer Gerhards <rgerhards at hq.adiscon.com>

> Michael,
>
> you really don't understand me: I do not see ANY problem at all what could
> be
> wrong in rsyslog (I don't say there is none...)! All I see is that it
> operates correctly! So tell me how should I instrument it? What to look
> for?
> And why?
>
> I don't think I can help you here without further input on why the script
> reports this failure. Don't be upset, but I won't respond any longer to
> this
> thread as it turns out to become a huge waste of time for me...
>
> I wish I had a better answer...
>
> Rainer
>
> > -----Original Message-----
> > From: rsyslog-bounces at lists.adiscon.com [mailto:rsyslog-
> > bounces at lists.adiscon.com] On Behalf Of Michael Maymann
> > Sent: Friday, February 03, 2012 5:06 PM
> > To: rsyslog-users
> > Subject: Re: [rsyslog] if %FROMHOST% == '???' then %FROMHOST% == %IP%
> >
> > Perhaps we could also figure this <PrivDropToUser>-thing out at the same
> > time...:-) !
> >
> > ~maymann
> >
> > 2012/2/3 Michael Maymann <michael at maymann.org>
> >
> > > Sure...:-) !
> > >
> > > ~maymann
> > >
> > >
> > >
> > > 2012/2/3 Rainer Gerhards <rgerhards at hq.adiscon.com>
> > >
> > >> I just checked where the ??? could be routed in. I see one case that
> > >> happens when the DNS resolution fails.  Would you be willing to run
> > >> an instrumented build to capture a debug log so that we see when this
> > >> happens?
> > >>
> > >> rainer
> > >>
> > >> > -----Original Message-----
> > >> > From: rsyslog-bounces at lists.adiscon.com [mailto:rsyslog-
> > >> > bounces at lists.adiscon.com] On Behalf Of Michael Maymann
> > >> > Sent: Friday, February 03, 2012 11:24 AM
> > >> > To: rsyslog-users
> > >> > Subject: Re: [rsyslog] if %FROMHOST% == '???' then %FROMHOST% ==
> > >> > %IP%
> > >> >
> > >> > Hi,
> > >> >
> > >> > David: thanks for you reply...:-) !
> > >> >
> > >> > This is not a known client causing the "???" entries - I don't know
> > >> > the ip(s)/hostname(s), and this is why i would like to log IP
> > >> > instead of
> > >> hostname -
> > >> > as my guess is it is a network device without DNS entry...:-( !
> > >> >
> > >> > Can I troubleshoot on the server somehow similar... or was that the
> > >> intention
> > >> > all along...:-o !
> > >> >
> > >> > Here is the client-debug output anyways...:
> > >> > # cat messages-debug
> > >> > Debug line with all properties:
> > >> > FROMHOST: '<HOSTNAME>', fromhost-ip: '127.0.0.1', HOSTNAME:
> > >> > '<HOSTNAME>',
> > >> > PRI: 6,
> > >> > syslogtag 'kernel:', programname: 'kernel', APP-NAME: 'kernel',
> PROCID:
> > >> > '-', MSGID: '-',
> > >> > TIMESTAMP: 'Feb  3 11:14:24', STRUCTURED-DATA: '-',
> > >> > msg: 'imklog 4.6.2, log source = /proc/kmsg started.'
> > >> > escaped msg: 'imklog 4.6.2, log source = /proc/kmsg started.'
> > >> > rawmsg: 'imklog 4.6.2, log source = /proc/kmsg started.'
> > >> >
> > >> > Debug line with all properties:
> > >> > FROMHOST: '<HOSTNAME>', fromhost-ip: '127.0.0.1', HOSTNAME:
> > >> > '<HOSTNAME>',
> > >> > PRI: 46,
> > >> > syslogtag 'rsyslogd:', programname: 'rsyslogd', APP-NAME:
> > >> > 'rsyslogd',
> > >> > PROCID: '-', MSGID: '-',
> > >> > TIMESTAMP: 'Feb  3 11:14:24', STRUCTURED-DATA: '-',
> > >> > msg: ' [origin software="rsyslogd" swVersion="4.6.2" x-pid="13432"
> > >> x-info="
> > >> > http://www.rsyslog.com"] (re)start'
> > >> > escaped msg: ' [origin software="rsyslogd" swVersion="4.6.2"
> > >> x-pid="13432"
> > >> > x-info="http://www.rsyslog.com"] (re)start'
> > >> > rawmsg: ' [origin software="rsyslogd" swVersion="4.6.2"
> x-pid="13432"
> > >> > x-info="http://www.rsyslog.com"] (re)start'
> > >> >
> > >> > Debug line with all properties:
> > >> > FROMHOST: '<HOSTNAME>', fromhost-ip: '127.0.0.1', HOSTNAME:
> > >> > '<HOSTNAME>',
> > >> > PRI: 13,
> > >> > syslogtag 'root:', programname: 'root', APP-NAME: 'root', PROCID:
> > >> > '-',
> > >> > MSGID: '-',
> > >> > TIMESTAMP: 'Feb  3 11:14:30', STRUCTURED-DATA: '-',
> > >> > msg: ' hej'
> > >> > escaped msg: ' hej'
> > >> > rawmsg: '<13>Feb  3 11:14:30 root: hej'
> > >> >
> > >> >
> > >> > Thanks in advance :-) !
> > >> > ~maymann
> > >> >
> > >> >
> > >> > 2012/2/3 <david at lang.hm>
> > >> >
> > >> > > oops, that should have been RSYSLOG_DebugFormat template.
> > >> > >
> > >> > > David Lang
> > >> > >
> > >> > > On Thu, 2 Feb 2012, david at lang.hm wrote:
> > >> > >
> > >> > >  Date: Thu, 2 Feb 2012 22:44:46 -0800 (PST)
> > >> > >> From: david at lang.hm
> > >> > >>
> > >> > >> Reply-To: rsyslog-users <rsyslog at lists.adiscon.com>
> > >> > >> To: rsyslog-users <rsyslog at lists.adiscon.com>
> > >> > >> Subject: Re: [rsyslog] if %FROMHOST% == '???' then %FROMHOST%
> > ==
> > >> > %IP%
> > >> > >>
> > >> > >> what does one of these messages look like if you write it out
> > >> > >> with the RSYSLOG_DEBUG template?
> > >> > >>
> > >> > >> David Lang
> > >> > >>
> > >> > >> On Fri, 3 Feb 2012, Michael Maymann wrote:
> > >> > >>
> > >> > >>  Date: Fri, 3 Feb 2012 07:00:26 +0100
> > >> > >>> From: Michael Maymann <michael at maymann.org>
> > >> > >>> Reply-To: rsyslog-users <rsyslog at lists.adiscon.com>
> > >> > >>> To: rsyslog-users <rsyslog at lists.adiscon.com>
> > >> > >>> Subject: Re: [rsyslog] if %FROMHOST% == '???' then %FROMHOST%
> > >> > >>> == %IP%
> > >> > >>>
> > >> > >>> Please... Anyone?
> > >> > >>> On Feb 2, 2012 2:17 PM, "Michael Maymann"
> > <michael at maymann.org>
> > >> > wrote:
> > >> > >>>
> > >> > >>>  Hi,
> > >> > >>>>
> > >> > >>>> got it started... but still ??? dir+logfiles are showing up...
> > >> > >>>> This is now my rsyslog.conf:
> > >> > >>>> #SET PRIVILEGES
> > >> > >>>> $PreserveFQDN on
> > >> > >>>> $PrivDropToGroup <GROUP>
> > >> > >>>> $PrivDropToUser <USER>
> > >> > >>>> $DirCreateMode 0750
> > >> > >>>> $FileCreateMode 0640
> > >> > >>>> $UMASK 0027
> > >> > >>>>
> > >> > >>>> #LOAD MODULES
> > >> > >>>> $ModLoad imudp
> > >> > >>>> $UDPServerRun 514
> > >> > >>>> $UDPServerAddress 127.0.0.1
> > >> > >>>> $ModLoad imtcp
> > >> > >>>> $InputTCPServerRun 514
> > >> > >>>>
> > >> > >>>> #SET DESTINATION FOR LOGS
> > >> > >>>> $template
> > >> > >>>>
> > >> >
> > DYNmessages,"PATH_TO/%**FROMHOST%/%FROMHOST%_%$YEAR%.%**
> > >> > >>>> $MONTH%_messages"
> > >> > >>>> $template
> > >> > >>>>
> > >> >
> > DYNsecure,"PATH_TO/%FROMHOST%/**%FROMHOST%_%$YEAR%.%$MO
> > >> > NTH%_*
> > >> > >>>> *secure"
> > >> > >>>> $template
> > >> > >>>>
> > >> >
> > DYNmaillog,"PATH_TO/%FROMHOST%**/%FROMHOST%_%$YEAR%.%$MO
> > >> > NTH%_**maillog"
> > >> > >>>> $template
> > >> > >>>>
> > >> >
> > DYNcron,"PATH_TO/%FROMHOST%/%**FROMHOST%_%$YEAR%.%$MONT
> > >> > H%_**
> > >> > >>>> cron"
> > >> > >>>> $template
> > >> > >>>>
> > >> >
> > DYNspooler,"PATH_TO/%FROMHOST%**/%FROMHOST%_%$YEAR%.%$MO
> > >> > NTH%_**spooler"
> > >> > >>>> $template
> > >> > >>>>
> > >> >
> > DYNboot,"PATH_TO/%FROMHOST%/%**FROMHOST%_%$YEAR%.%$MONT
> > >> > H%_**
> > >> > >>>> boot.log"
> > >> > >>>> $template
> > >> > >>>>
> > >> >
> > DYNtraps,"PATH_TO/%FROMHOST%/%**FROMHOST%_%$YEAR%.%$MONT
> > >> > H%_**
> > >> > >>>> traps"
> > >> > >>>>
> > >> > >>>> $template
> > >> > >>>> DYNIPmessages,"PATH_TO/%**FROMHOST-IP%/%FROMHOST-
> > >> > IP%_%$**
> > >> > >>>> YEAR%.%$MONTH%_messages"
> > >> > >>>> $template
> > >> > >>>> DYNIPsecure,"PATH_TO/%**FROMHOST-IP%/%FROMHOST-
> > >> > IP%_%$**
> > >> > >>>> YEAR%.%$MONTH%_secure"
> > >> > >>>> $template
> > >> > >>>> DYNIPmaillog,"PATH_TO/%**FROMHOST-IP%/%FROMHOST-
> > >> > IP%_%$**
> > >> > >>>> YEAR%.%$MONTH%_maillog"
> > >> > >>>> $template
> > >> > >>>> DYNIPcron,"PATH_TO/%FROMHOST-**IP%/%FROMHOST-
> > >> > IP%_%$YEAR%.%$**
> > >> > >>>> MONTH%_cron"
> > >> > >>>> $template
> > >> > >>>> DYNIPspooler,"PATH_TO/%**FROMHOST-IP%/%FROMHOST-
> > >> > IP%_%$**
> > >> > >>>> YEAR%.%$MONTH%_spooler"
> > >> > >>>> $template
> > >> > >>>> DYNIPboot,"PATH_TO/%FROMHOST-**IP%/%FROMHOST-
> > >> > IP%_%$YEAR%.%$**
> > >> > >>>> MONTH%_boot.log"
> > >> > >>>> $template
> > >> > >>>> DYNIPtraps,"PATH_TO/%FROMHOST-**IP%/%FROMHOST-
> > >> > IP%_%$YEAR%.%$**
> > >> > >>>> MONTH%_traps"
> > >> > >>>>
> > >> > >>>> #SET LOGGING CONDITIONS
> > >> > >>>> if $syslogseverity <= '6' and $fromhost != '???' then
> > >> > >>>> ?DYNmessages if $syslogfacility-text == 'authpriv' and
> > >> > >>>> $fromhost != '???' then ?DYNsecure if $syslogfacility-text ==
> 'mail'
> > and $fromhost != '???'
> > >> > >>>> then ?DYNmaillog if $syslogfacility-text == 'cron' and
> > >> > >>>> $fromhost != '???' then ?DYNcron if $syslogseverity-text ==
> > >> > >>>> 'crit' and $fromhost != '???' then ?DYNspooler if
> > >> > >>>> $syslogfacility-text == 'local7' and $fromhost != '???' then
> > >> > >>>> ?DYNboot if $syslogfacility-text == 'local6' and
> $syslogseverity-text
> > == 'WARNING'
> > >> > >>>> and $fromhost != '???' then ?DYNtraps
> > >> > >>>>
> > >> > >>>> if $syslogseverity <= '6' and $fromhost == '???' then
> > >> > >>>> ?DYNIPmessages if $syslogfacility-text == 'authpriv' and
> > >> > >>>> $fromhost == '???' then ?DYNIPsecure if $syslogfacility-text
> > >> > >>>> == 'mail' and $fromhost == '???' then ?DYNIPmaillog if
> > >> > >>>> $syslogfacility-text == 'cron' and $fromhost == '???' then
> > >> > >>>> ?DYNIPcron if $syslogseverity-text == 'crit' and $fromhost ==
> > >> > >>>> '???' then ?DYNIPspooler if $syslogfacility-text == 'local7'
> > >> > >>>> and $fromhost == '???' then ?DYNIPboot if $syslogfacility-text
> > >> > >>>> == 'local6' and $syslogseverity-text == 'WARNING'
> > >> > >>>> and $fromhost == '???' then ?DYNIPtraps
> > >> > >>>>
> > >> > >>>> I have tried with $fromhost, $fromhost-ip and $hostname - but
> > >> > >>>> all creates ??? dir+files...
> > >> > >>>> What variable should I use to handle this properly ?
> > >> > >>>>
> > >> > >>>>
> > >> > >>>> Thanks in advance :-) !
> > >> > >>>> ~maymann
> > >> > >>>>
> > >> > >>>> 2012/2/2 Michael Maymann <michael at maymann.org>
> > >> > >>>>
> > >> > >>>>  Hi,
> > >> > >>>>>
> > >> > >>>>> David: thanks for your reply...
> > >> > >>>>> Here is my new rsyslog.conf:
> > >> > >>>>> #SET PRIVILEGES
> > >> > >>>>> $PreserveFQDN on
> > >> > >>>>> $PrivDropToGroup <GROUP>
> > >> > >>>>> $PrivDropToUser <USER>
> > >> > >>>>> $DirCreateMode 0750
> > >> > >>>>> $FileCreateMode 0640
> > >> > >>>>> $UMASK 0027
> > >> > >>>>>
> > >> > >>>>> #LOAD MODULES
> > >> > >>>>> $ModLoad imudp
> > >> > >>>>> $UDPServerRun 514
> > >> > >>>>> $UDPServerAddress 127.0.0.1
> > >> > >>>>> $ModLoad imtcp
> > >> > >>>>> $InputTCPServerRun 514
> > >> > >>>>>
> > >> > >>>>> #SET DESTINATION FOR LOGS
> > >> > >>>>> $template
> > >> > >>>>>
> > >> >
> > DYNmessages,"PATH_TO/%**FROMHOST%/%FROMHOST%_%$YEAR%.%**
> > >> > >>>>> $MONTH%_messages"
> > >> > >>>>> $template
> > >> > >>>>>
> > >> >
> > DYNsecure,"PATH_TO/%FROMHOST%/**%FROMHOST%_%$YEAR%.%$MO
> > >> > NTH%_**secure"
> > >> > >>>>> $template
> > >> > >>>>>
> > >> >
> > DYNmaillog,"PATH_TO/%FROMHOST%**/%FROMHOST%_%$YEAR%.%$MO
> > >> > NTH%_**
> > >> > >>>>> maillog"
> > >> > >>>>> $template
> > >> > >>>>>
> > >> >
> > DYNcron,"PATH_TO/%FROMHOST%/%**FROMHOST%_%$YEAR%.%$MONT
> > >> > H%_**
> > >> > >>>>> cron"
> > >> > >>>>> $template
> > >> > >>>>>
> > >> >
> > DYNspooler,"PATH_TO/%FROMHOST%**/%FROMHOST%_%$YEAR%.%$MO
> > >> > NTH%_**
> > >> > >>>>> spooler"
> > >> > >>>>> $template
> > >> > >>>>>
> > >> >
> > DYNboot,"PATH_TO/%FROMHOST%/%**FROMHOST%_%$YEAR%.%$MONT
> > >> > H%_**boot.log"
> > >> > >>>>> $template
> > >> > >>>>>
> > >> >
> > DYNtraps,"PATH_TO/%FROMHOST%/%**FROMHOST%_%$YEAR%.%$MONT
> > >> > H%_*
> > >> > >>>>> *traps"
> > >> > >>>>>
> > >> > >>>>> $template
> > >> > >>>>> DYNIPmessages,"PATH_TO/%**FROMHOST-IP%/%FROMHOST-
> > >> > IP%_%$**
> > >> > >>>>> YEAR%.%$MONTH%_messages"
> > >> > >>>>> $template
> > >> > >>>>> DYNIPsecure,"PATH_TO/%**FROMHOST-IP%/%FROMHOST-
> > >> > IP%_%$**
> > >> > >>>>> YEAR%.%$MONTH%_secure"
> > >> > >>>>> $template
> > >> > >>>>> DYNIPmaillog,"PATH_TO/%**FROMHOST-IP%/%FROMHOST-
> > >> > IP%_%$**
> > >> > >>>>> YEAR%.%$MONTH%_maillog"
> > >> > >>>>> $template
> > >> > >>>>> DYNIPcron,"PATH_TO/%FROMHOST-**IP%/%FROMHOST-
> > >> > IP%_%$YEAR%.%$**
> > >> > >>>>> MONTH%_cron"
> > >> > >>>>> $template
> > >> > >>>>> DYNIPspooler,"PATH_TO/%**FROMHOST-IP%/%FROMHOST-
> > >> > IP%_%$**
> > >> > >>>>> YEAR%.%$MONTH%_spooler"
> > >> > >>>>> $template
> > >> > >>>>> DYNIPboot,"PATH_TO/%FROMHOST-**IP%/%FROMHOST-
> > >> > IP%_%$YEAR%.%$**
> > >> > >>>>> MONTH%_boot.log"
> > >> > >>>>> $template
> > >> > >>>>> DYNIPtraps,"PATH_TO/%FROMHOST-**IP%/%FROMHOST-
> > >> > IP%_%$YEAR%.%$**
> > >> > >>>>> MONTH%_traps"
> > >> > >>>>>
> > >> > >>>>> #SET LOGGING CONDITIONS
> > >> > >>>>> if $syslogseverity <= '6' and %FROMHOST% != '???' then
> > >> > >>>>> ?DYNmessages if $syslogfacility-text == 'authpriv' and
> > >> > >>>>> %FROMHOST% != '???' then ?DYNsecure if $syslogfacility-text
> > >> > >>>>> == 'mail' and %FROMHOST% != '???' then ?DYNmaillog if
> > >> > >>>>> $syslogfacility-text == 'cron' and %FROMHOST% != '???' then
> > >> > >>>>> ?DYNcron if $syslogseverity-text == 'crit' and %FROMHOST% !=
> > >> > >>>>> '???' then ?DYNspooler if $syslogfacility-text == 'local7'
> > >> > >>>>> and %FROMHOST% != '???' then ?DYNboot if $syslogfacility-text
> > >> > >>>>> == 'local6' and $syslogseverity-text == 'WARNING'
> > >> > >>>>> and %FROMHOST% != '???' then ?DYNtraps
> > >> > >>>>>
> > >> > >>>>> if $syslogseverity <= '6' and %FROMHOST% == '???' then
> > >> > >>>>> ?DYNIPmessages if $syslogfacility-text == 'authpriv' and
> > >> > >>>>> %FROMHOST% == '???' then ?DYNIPsecure if $syslogfacility-text
> > >> > >>>>> == 'mail' and %FROMHOST% == '???' then ?DYNIPmaillog if
> > >> > >>>>> $syslogfacility-text == 'cron' and %FROMHOST% == '???' then
> > >> > >>>>> ?DYNIPcron if $syslogseverity-text == 'crit' and %FROMHOST%
> > >> > >>>>> == '???' then ?DYNIPspooler if $syslogfacility-text ==
> > >> > >>>>> 'local7' and %FROMHOST% == '???' then ?DYNIPboot if
> > >> > >>>>> $syslogfacility-text == 'local6' and $syslogseverity-text ==
> > 'WARNING'
> > >> > >>>>> and %FROMHOST% == '???' then ?DYNIPtraps
> > >> > >>>>>
> > >> > >>>>> but it fails...:
> > >> > >>>>> # service rsyslog start
> > >> > >>>>> Starting system logger: rsyslogd: run failed with error -2207
> > >> > >>>>> (see rsyslog.h or try http://www.rsyslog.com/e/2207 to learn
> > >> > >>>>> what that number
> > >> > >>>>> means)
> > >> > >>>>>                                                           [
> > >> > >>>>> OK  ]
> > >> > >>>>>
> > >> > >>>>> my guess is it is my %FROMHOST% == '???' - is this format
> > >> > >>>>> correct or how is this done...
> > >> > >>>>>
> > >> > >>>>>
> > >> > >>>>> Thanks in advance :-) !
> > >> > >>>>> ~maymann
> > >> > >>>>>
> > >> > >>>>>
> > >> > >>>>> 2012/2/1 <david at lang.hm>
> > >> > >>>>>
> > >> > >>>>> On Wed, 1 Feb 2012, Michael Maymann wrote:
> > >> > >>>>>
> > >> > >>>>>>
> > >> > >>>>>>  Hi,
> > >> > >>>>>>
> > >> > >>>>>>>
> > >> > >>>>>>> I want to log information about hosts that are not logging
> > >> > >>>>>>> with correct HOSTNAME.
> > >> > >>>>>>> In my current setup, I get a dir "???" where these host(s)
> > >> > >>>>>>> are logging to...
> > >> > >>>>>>>
> > >> > >>>>>>> I would like to change this to the hosts IP instead,
> > >> > >>>>>>> something
> > >> like:
> > >> > >>>>>>> if %FROMHOST% == '???' then %FROMHOST% == %IP
> > >> > >>>>>>>
> > >> > >>>>>>>
> > >> > >>>>>> rsyslog cannot do what you are asking. It can't assign a
> > >> > >>>>>> value to a property.
> > >> > >>>>>>
> > >> > >>>>>> what you can do is to setup a different template and then if
> > >> > >>>>>> %fromhost% is your special pattern you can log with this
> > >> > >>>>>> different template.
> > >> > >>>>>>
> > >> > >>>>>> David Lang
> > >> > >>>>>>
> > ______________________________****_________________
> > >> > >>>>>> rsyslog mailing list
> > >> > >>>>>> http://lists.adiscon.net/****mailman/listinfo/rsyslog<
> > >> http://list
> > >> > >>>>>> s.adiscon.net/**mailman/listinfo/rsyslog>
> > >> > >>>>>> <http:**//lists.adiscon.net/mailman/**listinfo/rsyslog<
> > >> http://lis
> > >> > >>>>>> ts.adiscon.net/mailman/listinfo/rsyslog>
> > >> > >>>>>> >
> > >> > >>>>>> http://www.rsyslog.com/****professional-
> > >> > services/<http://www.rsys
> > >> > >>>>>> log.com/**professional-services/>
> > >> > >>>>>> <http://**www.rsyslog.com/professional-
> > >> > **services/<http://www.rsy
> > >> > >>>>>> slog.com/professional-services/>
> > >> > >>>>>> >
> > >> > >>>>>>
> > >> > >>>>>>
> > >> > >>>>>
> > >> > >>>>>
> > >> > >>>>  ______________________________**_________________
> > >> > >>> rsyslog mailing list
> > >> > >>> http://lists.adiscon.net/**mailman/listinfo/rsyslog<
> > >> http://lists.adi
> > >> > >>> scon.net/mailman/listinfo/rsyslog>
> > >> > >>> http://www.rsyslog.com/**professional-
> > >> > services/<http://www.rsyslog.c
> > >> > >>> om/professional-services/>
> > >> > >>>
> > >> > >>>  ______________________________**_________________
> > >> > >> rsyslog mailing list
> > >> > >> http://lists.adiscon.net/**mailman/listinfo/rsyslog<
> > >> http://lists.adis
> > >> > >> con.net/mailman/listinfo/rsyslog>
> > >> > >> http://www.rsyslog.com/**professional-
> > >> > services/<http://www.rsyslog.co
> > >> > >> m/professional-services/>
> > >> > >>
> > >> > >>  ______________________________**_________________
> > >> > > rsyslog mailing list
> > >> > > http://lists.adiscon.net/**mailman/listinfo/rsyslog<
> > >> http://lists.adisc
> > >> > > on.net/mailman/listinfo/rsyslog>
> > >> > > http://www.rsyslog.com/**professional-
> > >> > services/<http://www.rsyslog.com
> > >> > > /professional-services/>
> > >> > >
> > >> > _______________________________________________
> > >> > rsyslog mailing list
> > >> > http://lists.adiscon.net/mailman/listinfo/rsyslog
> > >> > http://www.rsyslog.com/professional-services/
> > >> _______________________________________________
> > >> rsyslog mailing list
> > >> http://lists.adiscon.net/mailman/listinfo/rsyslog
> > >> http://www.rsyslog.com/professional-services/
> > >>
> > >
> > >
> > _______________________________________________
> > rsyslog mailing list
> > http://lists.adiscon.net/mailman/listinfo/rsyslog
> > http://www.rsyslog.com/professional-services/
> _______________________________________________
> rsyslog mailing list
> http://lists.adiscon.net/mailman/listinfo/rsyslog
> http://www.rsyslog.com/professional-services/
>



More information about the rsyslog mailing list