[Lognorm] [libee] parallel make
Rainer Gerhards
rgerhards at hq.adiscon.com
Thu Apr 11 21:08:20 CEST 2013
I haven't seen the patch on quick glimpse, but i am definitely interested in adding it. If I have not done by Monday, please ping me.
Sent from phone, thus brief.
-------- Ursprüngliche Nachricht --------
Von: Yao Zhao <yao.zhao at windriver.com>
Datum: 11.04.2013 20:16 (GMT+01:00)
An: David Lang <david at lang.hm>
Cc: lognorm <lognorm at lists.adiscon.com>
Betreff: Re: [Lognorm] [libee] parallel make
On 13-04-11 02:13 PM, David Lang wrote:
> don't do a parallel make, do a normal make (no -j), do you still have
> the problem?
>
No.
The patch is not acceptable?
thanks,
yao
> David Lang
>
> On Thu, 11 Apr 2013, Yao Zhao wrote:
>
>> Date: Thu, 11 Apr 2013 14:06:51 -0400
>> From: Yao Zhao <yao.zhao at windriver.com>
>> To: David Lang <david at lang.hm>
>> Cc: lognorm <lognorm at lists.adiscon.com>
>> Subject: Re: [Lognorm] [libee] parallel make
>>
>> On 13-04-11 02:03 PM, David Lang wrote:
>>> do you continue to have the problem if you don't do a parallel make?
>>>
>> I don't have problem without parallel make as I indicated in original
>> email below.
>>> If I am reading it correctly, you are failing at the linking stage,
>>> after everything should be compiled. This could be a error in the
>>> dependancy mapping.
>>>
>> Yes, it happens at link as the libee.la is not ready yet because of
>> parallel making.
>> and that is why I add a libee_convert_DEPENDENCIES=libee.la
>> I don't quite understand why the automake didn't get a correct
>> _DEPENDENCIES automatically.
>>
>> Do you have a better way?
>>
>> yao
>>> David Lang
>>>
>>> On Thu, 11 Apr 2013, Yao Zhao wrote:
>>>
>>>> Date: Thu, 11 Apr 2013 10:22:51 -0400
>>>> From: Yao Zhao <yao.zhao at windriver.com>
>>>> Reply-To: lognorm <lognorm at lists.adiscon.com>
>>>> To: lognorm at lists.adiscon.com, Yao Zhao <yao.zhao at windriver.com>
>>>> Subject: [Lognorm] [libee] parallel make
>>>>
>>>> Hi,
>>>>
>>>> I got problem with libee's parallel making:
>>>>
>>>> yzhao2 at yzhao2-OptiPlex-990:~/src/libee$ ./configure
>>>> --libdir=/usr/local/lib --includedir=/home/yzhao2/src/include
>>>> LIBESTR_CFLAGS=-I/home/yzhao2/src/include
>>>> LIBESTR_LIBS='-L/usr/local/lib -lestr'
>>>> checking for a BSD-compatible install... /usr/bin/install -c
>>>> checking whether build environment is sane... yes
>>>> checking for a thread-safe mkdir -p... /bin/mkdir -p
>>>> checking for gawk... gawk
>>>> checking whether make sets $(MAKE)... yes
>>>> checking whether make supports nested variables... yes
>>>> checking for gcc... gcc
>>>> checking whether the C compiler works... yes
>>>> checking for C compiler default output file name... a.out
>>>> checking for suffix of executables...
>>>> checking whether we are cross compiling... no
>>>> checking for suffix of object files... o
>>>> checking whether we are using the GNU C compiler... yes
>>>> checking whether gcc accepts -g... yes
>>>> checking for gcc option to accept ISO C89... none needed
>>>> checking for style of include used by make... GNU
>>>> checking dependency style of gcc... gcc3
>>>> checking whether gcc and cc understand -c and -o together... yes
>>>> checking build system type... x86_64-unknown-linux-gnu
>>>> checking host system type... x86_64-unknown-linux-gnu
>>>> checking how to print strings... printf
>>>> checking for a sed that does not truncate output... /bin/sed
>>>> checking for grep that handles long lines and -e... /bin/grep
>>>> checking for egrep... /bin/grep -E
>>>> checking for fgrep... /bin/grep -F
>>>> checking for ld used by gcc... /usr/bin/ld
>>>> checking if the linker (/usr/bin/ld) is GNU ld... yes
>>>> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
>>>> checking the name lister (/usr/bin/nm -B) interface... BSD nm
>>>> checking whether ln -s works... yes
>>>> checking the maximum length of command line arguments... 1572864
>>>> checking whether the shell understands some XSI constructs... yes
>>>> checking whether the shell understands "+="... yes
>>>> checking how to convert x86_64-unknown-linux-gnu file names to
>>>> x86_64-unknown-linux-gnu format... func_convert_file_noop
>>>> checking how to convert x86_64-unknown-linux-gnu file names to
>>>> toolchain format... func_convert_file_noop
>>>> checking for /usr/bin/ld option to reload object files... -r
>>>> checking for objdump... objdump
>>>> checking how to recognize dependent libraries... pass_all
>>>> checking for dlltool... no
>>>> checking how to associate runtime and link libraries... printf %s\n
>>>> checking for ar... ar
>>>> checking for archiver @FILE support... @
>>>> checking for strip... strip
>>>> checking for ranlib... ranlib
>>>> checking command to parse /usr/bin/nm -B output from gcc object... ok
>>>> checking for sysroot... no
>>>> checking for mt... mt
>>>> checking if mt is a manifest tool... no
>>>> checking how to run the C preprocessor... gcc -E
>>>> checking for ANSI C header files... yes
>>>> checking for sys/types.h... yes
>>>> checking for sys/stat.h... yes
>>>> checking for stdlib.h... yes
>>>> checking for string.h... yes
>>>> checking for memory.h... yes
>>>> checking for strings.h... yes
>>>> checking for inttypes.h... yes
>>>> checking for stdint.h... yes
>>>> checking for unistd.h... yes
>>>> checking for dlfcn.h... yes
>>>> checking for objdir... .libs
>>>> checking if gcc supports -fno-rtti -fno-exceptions... no
>>>> checking for gcc option to produce PIC... -fPIC -DPIC
>>>> checking if gcc PIC flag -fPIC -DPIC works... yes
>>>> checking if gcc static flag -static works... yes
>>>> checking if gcc supports -c -o file.o... yes
>>>> checking if gcc supports -c -o file.o... (cached) yes
>>>> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64)
>>>> supports shared libraries... yes
>>>> checking whether -lc should be explicitly linked in... no
>>>> checking dynamic linker characteristics... GNU/Linux ld.so
>>>> checking how to hardcode library paths into programs... immediate
>>>> checking whether stripping libraries is possible... yes
>>>> checking if libtool supports shared libraries... yes
>>>> checking whether to build shared libraries... yes
>>>> checking whether to build static libraries... yes
>>>> checking for library containing pow... -lm
>>>> checking for stdlib.h... (cached) yes
>>>> checking for GNU libc compatible malloc... yes
>>>> checking for pkg-config... /usr/bin/pkg-config
>>>> checking pkg-config is at least version 0.9.0... yes
>>>> checking for LIBESTR... yes
>>>> configure: creating ./config.status
>>>> config.status: creating Makefile
>>>> config.status: creating libee.pc
>>>> config.status: creating src/Makefile
>>>> config.status: creating include/Makefile
>>>> config.status: creating include/libee/Makefile
>>>> config.status: creating tests/Makefile
>>>> config.status: creating config.h
>>>> config.status: executing depfiles commands
>>>> config.status: executing libtool commands
>>>> *****************************************************
>>>> libee will be compiled with the following settings:
>>>>
>>>> Debug mode enabled: no
>>>> Testbench enabled: yes
>>>> yzhao2 at yzhao2-OptiPlex-990:~/src/libee$ make -j 6
>>>> make all-recursive
>>>> make[1]: Entering directory `/home/yzhao2/src/libee'
>>>> Making all in tests
>>>> make[2]: Entering directory `/home/yzhao2/src/libee/tests'
>>>> make[2]: Nothing to be done for `all'.
>>>> make[2]: Leaving directory `/home/yzhao2/src/libee/tests'
>>>> Making all in include
>>>> make[2]: Entering directory `/home/yzhao2/src/libee/include'
>>>> Making all in libee
>>>> make[3]: Entering directory `/home/yzhao2/src/libee/include/libee'
>>>> make[3]: Nothing to be done for `all'.
>>>> make[3]: Leaving directory `/home/yzhao2/src/libee/include/libee'
>>>> make[3]: Entering directory `/home/yzhao2/src/libee/include'
>>>> make[3]: Nothing to be done for `all-am'.
>>>> make[3]: Leaving directory `/home/yzhao2/src/libee/include'
>>>> make[2]: Leaving directory `/home/yzhao2/src/libee/include'
>>>> Making all in src
>>>> make[2]: Entering directory `/home/yzhao2/src/libee/src'
>>>> CC libee_la-cjson.lo
>>>> CC libee_la-ctx.lo
>>>> CC libee_la-tag.lo
>>>> CC libee_la-event.lo
>>>> CC libee_la-value.lo
>>>> CC libee_la-json_event.lo
>>>> value.c: In function 'ee_newValue':
>>>> value.c:37:20: warning: unused parameter 'ctx' [-Wunused-parameter]
>>>> CC libee_la-tagbucket.lo
>>>> CC libee_la-field.lo
>>>> CC libee_la-fieldbucket.lo
>>>> CC libee_la-primitivetype.lo
>>>> CC libee_la-int_dec.lo
>>>> primitivetype.c: In function 'ee_parseRFC5424Date':
>>>> primitivetype.c:136:7: warning: variable 'OffsetMode' set but not
>>>> used [-Wunused-but-set-variable]
>>>> primitivetype.c:135:6: warning: variable 'secfracPrecision' set but
>>>> not used [-Wunused-but-set-variable]
>>>> primitivetype.c:134:6: warning: variable 'secfrac' set but not used
>>>> [-Wunused-but-set-variable]
>>>> primitivetype.c:128:6: warning: variable 'year' set but not used
>>>> [-Wunused-but-set-variable]
>>>> primitivetype.c: In function 'ee_parseRFC3164Date':
>>>> primitivetype.c:261:6: warning: variable 'month' set but not used
>>>> [-Wunused-but-set-variable]
>>>> primitivetype.c: In function 'ee_parseNumber':
>>>> primitivetype.c:497:12: warning: variable 'n' set but not used
>>>> [-Wunused-but-set-variable]
>>>> CC libee_la-json_dec.lo
>>>> CC libee_la-apache_dec.lo
>>>> CC libee_la-syslog_enc.lo
>>>> CC libee_la-json_enc.lo
>>>> apache_dec.c: In function 'ee_newApache':
>>>> apache_dec.c:37:21: warning: unused parameter 'ctx'
>>>> [-Wunused-parameter]
>>>> apache_dec.c: In function 'ee_apacheAddName':
>>>> apache_dec.c:71:25: warning: unused parameter 'ctx'
>>>> [-Wunused-parameter]
>>>> apache_dec.c: In function 'processLn':
>>>> apache_dec.c:205:19: warning: unused variable 'value'
>>>> [-Wunused-variable]
>>>> apache_dec.c: In function 'ee_apacheDec':
>>>> apache_dec.c:212:3: warning: 'r' may be used uninitialized in this
>>>> function [-Wuninitialized]
>>>> apache_dec.c:143:6: note: 'r' was declared here
>>>> CC libee_la-csv_enc.lo
>>>> csv_enc.c: In function 'ee_AddName':
>>>> csv_enc.c:66:19: warning: unused parameter 'ctx' [-Wunused-parameter]
>>>> CC libee_la-xml_enc.lo
>>>> CC libee_convert-convert.o
>>>> xml_enc.c: In function 'ee_addValue_XML':
>>>> xml_enc.c:60:6: warning: unused variable 'j' [-Wunused-variable]
>>>> xml_enc.c:59:7: warning: unused variable 'numbuf' [-Wunused-variable]
>>>> xml_enc.c: At top level:
>>>> xml_enc.c:40:13: warning: 'hexdigit' defined but not used
>>>> [-Wunused-variable]
>>>> CCLD libee-convert
>>>> libtool: link: cannot find the library `../src/libee.la' or
>>>> unhandled argument `../src/libee.la'
>>>> make[2]: *** [libee-convert] Error 1
>>>> make[2]: *** Waiting for unfinished jobs....
>>>> make[2]: Leaving directory `/home/yzhao2/src/libee/src'
>>>> make[1]: *** [all-recursive] Error 1
>>>> make[1]: Leaving directory `/home/yzhao2/src/libee'
>>>> make: *** [all] Error 2
>>>> yzhao2 at yzhao2-OptiPlex-990:~/src/libee$ make
>>>> make all-recursive
>>>> make[1]: Entering directory `/home/yzhao2/src/libee'
>>>> Making all in tests
>>>> make[2]: Entering directory `/home/yzhao2/src/libee/tests'
>>>> make[2]: Nothing to be done for `all'.
>>>> make[2]: Leaving directory `/home/yzhao2/src/libee/tests'
>>>> Making all in include
>>>> make[2]: Entering directory `/home/yzhao2/src/libee/include'
>>>> Making all in libee
>>>> make[3]: Entering directory `/home/yzhao2/src/libee/include/libee'
>>>> make[3]: Nothing to be done for `all'.
>>>> make[3]: Leaving directory `/home/yzhao2/src/libee/include/libee'
>>>> make[3]: Entering directory `/home/yzhao2/src/libee/include'
>>>> make[3]: Nothing to be done for `all-am'.
>>>> make[3]: Leaving directory `/home/yzhao2/src/libee/include'
>>>> make[2]: Leaving directory `/home/yzhao2/src/libee/include'
>>>> Making all in src
>>>> make[2]: Entering directory `/home/yzhao2/src/libee/src'
>>>> CCLD libee.la
>>>> CCLD libee-convert
>>>> make[2]: Leaving directory `/home/yzhao2/src/libee/src'
>>>> make[2]: Entering directory `/home/yzhao2/src/libee'
>>>> make[2]: Leaving directory `/home/yzhao2/src/libee'
>>>> make[1]: Leaving directory `/home/yzhao2/src/libee'
>>>>
>>>>
>>>>
>>>>
>>>> reading src/Makefile generated:
>>>> am__DEPENDENCIES_1 =
>>>> libee_la_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
>>>> ...
>>>> libee_convert_OBJECTS = $(am_libee_convert_OBJECTS)
>>>> libee_convert_DEPENDENCIES = $(am__DEPENDENCIES_1) \
>>>> $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
>>>>
>>>> so libee_convert_DEPENDENCIES is empty, not sure why _DEPENDENCIES
>>>> are not
>>>> generated from its LDADD
>>>>
>>>> but add a
>>>> libee_convert_DEPENDENCIES= libee.la in src/Makefile.am fixed it.
>>>>
>>>> not all automake supports the EXTRA_...DEPDENDENCIES so didn't
>>>> change it.
>>>>
>>>> yao
>>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> Lognorm mailing list
>>>
>>> Lognorm at lists.adiscon.com
>>>
>>> http://lists.adiscon.net/mailman/listinfo/lognorm
>>>
>>
>>
_______________________________________________
Lognorm mailing list
Lognorm at lists.adiscon.com
http://lists.adiscon.net/mailman/listinfo/lognorm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.adiscon.net/pipermail/lognorm/attachments/20130411/74ccd165/attachment-0001.htm>
More information about the Lognorm
mailing list