[Lognorm] [libee] parallel make
Yao Zhao
yao.zhao at windriver.com
Tue Apr 16 21:59:35 CEST 2013
On 13-04-11 03:08 PM, Rainer Gerhards wrote:
> I haven't seen the patch on quick glimpse, but i am definitely
> interested in adding it. If I have not done by Monday, please ping me.
>
>
Hi Rainer,
Just ping you!
thanks,
yao
> Sent from phone, thus brief.
>
>
>
> -------- Ursprüngliche Nachricht --------
> Von: Yao Zhao <yao.zhao at windriver.com>
> Datum: 11.04.2013 20:16 (GMT+01:00)
> An: David Lang <david at lang.hm>
> Cc: lognorm <lognorm at lists.adiscon.com>
> Betreff: Re: [Lognorm] [libee] parallel make
>
>
> On 13-04-11 02:13 PM, David Lang wrote:
> > don't do a parallel make, do a normal make (no -j), do you still have
> > the problem?
> >
> No.
>
> The patch is not acceptable?
>
> thanks,
> yao
> > David Lang
> >
> > On Thu, 11 Apr 2013, Yao Zhao wrote:
> >
> >> Date: Thu, 11 Apr 2013 14:06:51 -0400
> >> From: Yao Zhao <yao.zhao at windriver.com>
> >> To: David Lang <david at lang.hm>
> >> Cc: lognorm <lognorm at lists.adiscon.com>
> >> Subject: Re: [Lognorm] [libee] parallel make
> >>
> >> On 13-04-11 02:03 PM, David Lang wrote:
> >>> do you continue to have the problem if you don't do a parallel make?
> >>>
> >> I don't have problem without parallel make as I indicated in original
> >> email below.
> >>> If I am reading it correctly, you are failing at the linking stage,
> >>> after everything should be compiled. This could be a error in the
> >>> dependancy mapping.
> >>>
> >> Yes, it happens at link as the libee.la is not ready yet because of
> >> parallel making.
> >> and that is why I add a libee_convert_DEPENDENCIES=libee.la
> >> I don't quite understand why the automake didn't get a correct
> >> _DEPENDENCIES automatically.
> >>
> >> Do you have a better way?
> >>
> >> yao
> >>> David Lang
> >>>
> >>> On Thu, 11 Apr 2013, Yao Zhao wrote:
> >>>
> >>>> Date: Thu, 11 Apr 2013 10:22:51 -0400
> >>>> From: Yao Zhao <yao.zhao at windriver.com>
> >>>> Reply-To: lognorm <lognorm at lists.adiscon.com>
> >>>> To: lognorm at lists.adiscon.com, Yao Zhao <yao.zhao at windriver.com>
> >>>> Subject: [Lognorm] [libee] parallel make
> >>>>
> >>>> Hi,
> >>>>
> >>>> I got problem with libee's parallel making:
> >>>>
> >>>> yzhao2 at yzhao2-OptiPlex-990:~/src/libee$ ./configure
> >>>> --libdir=/usr/local/lib --includedir=/home/yzhao2/src/include
> >>>> LIBESTR_CFLAGS=-I/home/yzhao2/src/include
> >>>> LIBESTR_LIBS='-L/usr/local/lib -lestr'
> >>>> checking for a BSD-compatible install... /usr/bin/install -c
> >>>> checking whether build environment is sane... yes
> >>>> checking for a thread-safe mkdir -p... /bin/mkdir -p
> >>>> checking for gawk... gawk
> >>>> checking whether make sets $(MAKE)... yes
> >>>> checking whether make supports nested variables... yes
> >>>> checking for gcc... gcc
> >>>> checking whether the C compiler works... yes
> >>>> checking for C compiler default output file name... a.out
> >>>> checking for suffix of executables...
> >>>> checking whether we are cross compiling... no
> >>>> checking for suffix of object files... o
> >>>> checking whether we are using the GNU C compiler... yes
> >>>> checking whether gcc accepts -g... yes
> >>>> checking for gcc option to accept ISO C89... none needed
> >>>> checking for style of include used by make... GNU
> >>>> checking dependency style of gcc... gcc3
> >>>> checking whether gcc and cc understand -c and -o together... yes
> >>>> checking build system type... x86_64-unknown-linux-gnu
> >>>> checking host system type... x86_64-unknown-linux-gnu
> >>>> checking how to print strings... printf
> >>>> checking for a sed that does not truncate output... /bin/sed
> >>>> checking for grep that handles long lines and -e... /bin/grep
> >>>> checking for egrep... /bin/grep -E
> >>>> checking for fgrep... /bin/grep -F
> >>>> checking for ld used by gcc... /usr/bin/ld
> >>>> checking if the linker (/usr/bin/ld) is GNU ld... yes
> >>>> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
> >>>> checking the name lister (/usr/bin/nm -B) interface... BSD nm
> >>>> checking whether ln -s works... yes
> >>>> checking the maximum length of command line arguments... 1572864
> >>>> checking whether the shell understands some XSI constructs... yes
> >>>> checking whether the shell understands "+="... yes
> >>>> checking how to convert x86_64-unknown-linux-gnu file names to
> >>>> x86_64-unknown-linux-gnu format... func_convert_file_noop
> >>>> checking how to convert x86_64-unknown-linux-gnu file names to
> >>>> toolchain format... func_convert_file_noop
> >>>> checking for /usr/bin/ld option to reload object files... -r
> >>>> checking for objdump... objdump
> >>>> checking how to recognize dependent libraries... pass_all
> >>>> checking for dlltool... no
> >>>> checking how to associate runtime and link libraries... printf %s\n
> >>>> checking for ar... ar
> >>>> checking for archiver @FILE support... @
> >>>> checking for strip... strip
> >>>> checking for ranlib... ranlib
> >>>> checking command to parse /usr/bin/nm -B output from gcc object... ok
> >>>> checking for sysroot... no
> >>>> checking for mt... mt
> >>>> checking if mt is a manifest tool... no
> >>>> checking how to run the C preprocessor... gcc -E
> >>>> checking for ANSI C header files... yes
> >>>> checking for sys/types.h... yes
> >>>> checking for sys/stat.h... yes
> >>>> checking for stdlib.h... yes
> >>>> checking for string.h... yes
> >>>> checking for memory.h... yes
> >>>> checking for strings.h... yes
> >>>> checking for inttypes.h... yes
> >>>> checking for stdint.h... yes
> >>>> checking for unistd.h... yes
> >>>> checking for dlfcn.h... yes
> >>>> checking for objdir... .libs
> >>>> checking if gcc supports -fno-rtti -fno-exceptions... no
> >>>> checking for gcc option to produce PIC... -fPIC -DPIC
> >>>> checking if gcc PIC flag -fPIC -DPIC works... yes
> >>>> checking if gcc static flag -static works... yes
> >>>> checking if gcc supports -c -o file.o... yes
> >>>> checking if gcc supports -c -o file.o... (cached) yes
> >>>> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64)
> >>>> supports shared libraries... yes
> >>>> checking whether -lc should be explicitly linked in... no
> >>>> checking dynamic linker characteristics... GNU/Linux ld.so
> >>>> checking how to hardcode library paths into programs... immediate
> >>>> checking whether stripping libraries is possible... yes
> >>>> checking if libtool supports shared libraries... yes
> >>>> checking whether to build shared libraries... yes
> >>>> checking whether to build static libraries... yes
> >>>> checking for library containing pow... -lm
> >>>> checking for stdlib.h... (cached) yes
> >>>> checking for GNU libc compatible malloc... yes
> >>>> checking for pkg-config... /usr/bin/pkg-config
> >>>> checking pkg-config is at least version 0.9.0... yes
> >>>> checking for LIBESTR... yes
> >>>> configure: creating ./config.status
> >>>> config.status: creating Makefile
> >>>> config.status: creating libee.pc
> >>>> config.status: creating src/Makefile
> >>>> config.status: creating include/Makefile
> >>>> config.status: creating include/libee/Makefile
> >>>> config.status: creating tests/Makefile
> >>>> config.status: creating config.h
> >>>> config.status: executing depfiles commands
> >>>> config.status: executing libtool commands
> >>>> *****************************************************
> >>>> libee will be compiled with the following settings:
> >>>>
> >>>> Debug mode enabled: no
> >>>> Testbench enabled: yes
> >>>> yzhao2 at yzhao2-OptiPlex-990:~/src/libee$ make -j 6
> >>>> make all-recursive
> >>>> make[1]: Entering directory `/home/yzhao2/src/libee'
> >>>> Making all in tests
> >>>> make[2]: Entering directory `/home/yzhao2/src/libee/tests'
> >>>> make[2]: Nothing to be done for `all'.
> >>>> make[2]: Leaving directory `/home/yzhao2/src/libee/tests'
> >>>> Making all in include
> >>>> make[2]: Entering directory `/home/yzhao2/src/libee/include'
> >>>> Making all in libee
> >>>> make[3]: Entering directory `/home/yzhao2/src/libee/include/libee'
> >>>> make[3]: Nothing to be done for `all'.
> >>>> make[3]: Leaving directory `/home/yzhao2/src/libee/include/libee'
> >>>> make[3]: Entering directory `/home/yzhao2/src/libee/include'
> >>>> make[3]: Nothing to be done for `all-am'.
> >>>> make[3]: Leaving directory `/home/yzhao2/src/libee/include'
> >>>> make[2]: Leaving directory `/home/yzhao2/src/libee/include'
> >>>> Making all in src
> >>>> make[2]: Entering directory `/home/yzhao2/src/libee/src'
> >>>> CC libee_la-cjson.lo
> >>>> CC libee_la-ctx.lo
> >>>> CC libee_la-tag.lo
> >>>> CC libee_la-event.lo
> >>>> CC libee_la-value.lo
> >>>> CC libee_la-json_event.lo
> >>>> value.c: In function 'ee_newValue':
> >>>> value.c:37:20: warning: unused parameter 'ctx' [-Wunused-parameter]
> >>>> CC libee_la-tagbucket.lo
> >>>> CC libee_la-field.lo
> >>>> CC libee_la-fieldbucket.lo
> >>>> CC libee_la-primitivetype.lo
> >>>> CC libee_la-int_dec.lo
> >>>> primitivetype.c: In function 'ee_parseRFC5424Date':
> >>>> primitivetype.c:136:7: warning: variable 'OffsetMode' set but not
> >>>> used [-Wunused-but-set-variable]
> >>>> primitivetype.c:135:6: warning: variable 'secfracPrecision' set but
> >>>> not used [-Wunused-but-set-variable]
> >>>> primitivetype.c:134:6: warning: variable 'secfrac' set but not used
> >>>> [-Wunused-but-set-variable]
> >>>> primitivetype.c:128:6: warning: variable 'year' set but not used
> >>>> [-Wunused-but-set-variable]
> >>>> primitivetype.c: In function 'ee_parseRFC3164Date':
> >>>> primitivetype.c:261:6: warning: variable 'month' set but not used
> >>>> [-Wunused-but-set-variable]
> >>>> primitivetype.c: In function 'ee_parseNumber':
> >>>> primitivetype.c:497:12: warning: variable 'n' set but not used
> >>>> [-Wunused-but-set-variable]
> >>>> CC libee_la-json_dec.lo
> >>>> CC libee_la-apache_dec.lo
> >>>> CC libee_la-syslog_enc.lo
> >>>> CC libee_la-json_enc.lo
> >>>> apache_dec.c: In function 'ee_newApache':
> >>>> apache_dec.c:37:21: warning: unused parameter 'ctx'
> >>>> [-Wunused-parameter]
> >>>> apache_dec.c: In function 'ee_apacheAddName':
> >>>> apache_dec.c:71:25: warning: unused parameter 'ctx'
> >>>> [-Wunused-parameter]
> >>>> apache_dec.c: In function 'processLn':
> >>>> apache_dec.c:205:19: warning: unused variable 'value'
> >>>> [-Wunused-variable]
> >>>> apache_dec.c: In function 'ee_apacheDec':
> >>>> apache_dec.c:212:3: warning: 'r' may be used uninitialized in this
> >>>> function [-Wuninitialized]
> >>>> apache_dec.c:143:6: note: 'r' was declared here
> >>>> CC libee_la-csv_enc.lo
> >>>> csv_enc.c: In function 'ee_AddName':
> >>>> csv_enc.c:66:19: warning: unused parameter 'ctx' [-Wunused-parameter]
> >>>> CC libee_la-xml_enc.lo
> >>>> CC libee_convert-convert.o
> >>>> xml_enc.c: In function 'ee_addValue_XML':
> >>>> xml_enc.c:60:6: warning: unused variable 'j' [-Wunused-variable]
> >>>> xml_enc.c:59:7: warning: unused variable 'numbuf' [-Wunused-variable]
> >>>> xml_enc.c: At top level:
> >>>> xml_enc.c:40:13: warning: 'hexdigit' defined but not used
> >>>> [-Wunused-variable]
> >>>> CCLD libee-convert
> >>>> libtool: link: cannot find the library `../src/libee.la' or
> >>>> unhandled argument `../src/libee.la'
> >>>> make[2]: *** [libee-convert] Error 1
> >>>> make[2]: *** Waiting for unfinished jobs....
> >>>> make[2]: Leaving directory `/home/yzhao2/src/libee/src'
> >>>> make[1]: *** [all-recursive] Error 1
> >>>> make[1]: Leaving directory `/home/yzhao2/src/libee'
> >>>> make: *** [all] Error 2
> >>>> yzhao2 at yzhao2-OptiPlex-990:~/src/libee$ make
> >>>> make all-recursive
> >>>> make[1]: Entering directory `/home/yzhao2/src/libee'
> >>>> Making all in tests
> >>>> make[2]: Entering directory `/home/yzhao2/src/libee/tests'
> >>>> make[2]: Nothing to be done for `all'.
> >>>> make[2]: Leaving directory `/home/yzhao2/src/libee/tests'
> >>>> Making all in include
> >>>> make[2]: Entering directory `/home/yzhao2/src/libee/include'
> >>>> Making all in libee
> >>>> make[3]: Entering directory `/home/yzhao2/src/libee/include/libee'
> >>>> make[3]: Nothing to be done for `all'.
> >>>> make[3]: Leaving directory `/home/yzhao2/src/libee/include/libee'
> >>>> make[3]: Entering directory `/home/yzhao2/src/libee/include'
> >>>> make[3]: Nothing to be done for `all-am'.
> >>>> make[3]: Leaving directory `/home/yzhao2/src/libee/include'
> >>>> make[2]: Leaving directory `/home/yzhao2/src/libee/include'
> >>>> Making all in src
> >>>> make[2]: Entering directory `/home/yzhao2/src/libee/src'
> >>>> CCLD libee.la
> >>>> CCLD libee-convert
> >>>> make[2]: Leaving directory `/home/yzhao2/src/libee/src'
> >>>> make[2]: Entering directory `/home/yzhao2/src/libee'
> >>>> make[2]: Leaving directory `/home/yzhao2/src/libee'
> >>>> make[1]: Leaving directory `/home/yzhao2/src/libee'
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> reading src/Makefile generated:
> >>>> am__DEPENDENCIES_1 =
> >>>> libee_la_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
> >>>> ...
> >>>> libee_convert_OBJECTS = $(am_libee_convert_OBJECTS)
> >>>> libee_convert_DEPENDENCIES = $(am__DEPENDENCIES_1) \
> >>>> $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
> >>>>
> >>>> so libee_convert_DEPENDENCIES is empty, not sure why _DEPENDENCIES
> >>>> are not
> >>>> generated from its LDADD
> >>>>
> >>>> but add a
> >>>> libee_convert_DEPENDENCIES= libee.la in src/Makefile.am fixed it.
> >>>>
> >>>> not all automake supports the EXTRA_...DEPDENDENCIES so didn't
> >>>> change it.
> >>>>
> >>>> yao
> >>>>
> >>>
> >>>
> >>> _______________________________________________
> >>>
> >>> Lognorm mailing list
> >>>
> >>> Lognorm at lists.adiscon.com
> >>>
> >>> http://lists.adiscon.net/mailman/listinfo/lognorm
> >>>
> >>
> >>
>
> _______________________________________________
> Lognorm mailing list
> Lognorm at lists.adiscon.com
> http://lists.adiscon.net/mailman/listinfo/lognorm
>
>
> _______________________________________________
> Lognorm mailing list
> Lognorm at lists.adiscon.com
> http://lists.adiscon.net/mailman/listinfo/lognorm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.adiscon.net/pipermail/lognorm/attachments/20130416/db5cc352/attachment-0001.htm>
More information about the Lognorm
mailing list