From B.Lubberdink at ram-it.nl Fri Feb 15 12:03:42 2013 From: B.Lubberdink at ram-it.nl (Bart Lubberdink) Date: Fri, 15 Feb 2013 12:03:42 +0100 Subject: [phpLogCon] reports problems In-Reply-To: References: Message-ID: Hello, We have can't seem to save reports. Steps I take: Admin Center -> Report Modules -> Add SavedReport and save changes Then I enter a comment and on the filter string I add "datelastx:3" All other things are kept default. Then, pressing "Add Savedreport and save changes" OR "Add Savedreport and return to reportlist" Will reset the form to default (no comments etc.) And no reports are being saved... When I look at "list installed reports", there are no saved reports... Does someone have a clue what might go wrong here? We use Version 3.6.2 Kind regards, ___________________________________ Bart Lubberdink - RAM From alorbach at ro1.adiscon.com Fri Feb 15 12:29:37 2013 From: alorbach at ro1.adiscon.com (Andre Lorbach) Date: Fri, 15 Feb 2013 11:29:37 +0000 Subject: [phpLogCon] reports problems In-Reply-To: References: Message-ID: Hi, try to add a savedreport with default values, and let me know if this works? If yes edit the savedreport afterwards, and verify if the comment or filter variables are saved. Best regards, Andre Lorbach > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > Sent: Freitag, 15. Februar 2013 12:04 > To: 'phplogcon at lists.adiscon.com' > Subject: [phpLogCon] reports problems > > Hello, > > We have can't seem to save reports. > Steps I take: Admin Center -> Report Modules -> Add SavedReport and save > changes Then I enter a comment and on the filter string I add "datelastx:3" > All other things are kept default. > > Then, pressing "Add Savedreport and save changes" OR "Add Savedreport > and return to reportlist" > Will reset the form to default (no comments etc.) And no reports are being > saved... > When I look at "list installed reports", there are no saved reports... > > Does someone have a clue what might go wrong here? > > We use Version 3.6.2 > > Kind regards, > ___________________________________ > Bart Lubberdink - RAM > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org From B.Lubberdink at ram-it.nl Fri Feb 15 13:49:03 2013 From: B.Lubberdink at ram-it.nl (Bart Lubberdink) Date: Fri, 15 Feb 2013 13:49:03 +0100 Subject: [phpLogCon] reports problems In-Reply-To: References: Message-ID: Hello Andre, No, no luck. Saving a report with only defaults isn't working either. Kind regards, Bart -----Original Message----- From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon-bounces at lists.adiscon.com] On Behalf Of Andre Lorbach Sent: vrijdag 15 februari 2013 12:30 To: 'phplogcon at lists.adiscon.com' Subject: Re: [phpLogCon] reports problems Hi, try to add a savedreport with default values, and let me know if this works? If yes edit the savedreport afterwards, and verify if the comment or filter variables are saved. Best regards, Andre Lorbach > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > Sent: Freitag, 15. Februar 2013 12:04 > To: 'phplogcon at lists.adiscon.com' > Subject: [phpLogCon] reports problems > > Hello, > > We have can't seem to save reports. > Steps I take: Admin Center -> Report Modules -> Add SavedReport and > save changes Then I enter a comment and on the filter string I add "datelastx:3" > All other things are kept default. > > Then, pressing "Add Savedreport and save changes" OR "Add Savedreport > and return to reportlist" > Will reset the form to default (no comments etc.) And no reports are > being saved... > When I look at "list installed reports", there are no saved reports... > > Does someone have a clue what might go wrong here? > > We use Version 3.6.2 > > Kind regards, > ___________________________________ > Bart Lubberdink - RAM > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org _______________________________________________ phpLogCon mailing list http://lists.adiscon.net/mailman/listinfo/phplogcon http://www.phplogcon.org From alorbach at ro1.adiscon.com Fri Feb 15 14:03:44 2013 From: alorbach at ro1.adiscon.com (Andre Lorbach) Date: Fri, 15 Feb 2013 13:03:44 +0000 Subject: [phpLogCon] reports problems In-Reply-To: References: Message-ID: Properly an issue with the browser you are using? Have you tried a different one? > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > Sent: Freitag, 15. Februar 2013 13:49 > To: 'phplogcon at lists.adiscon.com' > Subject: Re: [phpLogCon] reports problems > > Hello Andre, > > No, no luck. Saving a report with only defaults isn't working either. > > Kind regards, > Bart > > > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Andre Lorbach > Sent: vrijdag 15 februari 2013 12:30 > To: 'phplogcon at lists.adiscon.com' > Subject: Re: [phpLogCon] reports problems > > Hi, > > try to add a savedreport with default values, and let me know if this works? > If yes edit the savedreport afterwards, and verify if the comment or filter > variables are saved. > > Best regards, > Andre Lorbach > > > -----Original Message----- > > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > > Sent: Freitag, 15. Februar 2013 12:04 > > To: 'phplogcon at lists.adiscon.com' > > Subject: [phpLogCon] reports problems > > > > Hello, > > > > We have can't seem to save reports. > > Steps I take: Admin Center -> Report Modules -> Add SavedReport and > > save changes Then I enter a comment and on the filter string I add > "datelastx:3" > > All other things are kept default. > > > > Then, pressing "Add Savedreport and save changes" OR "Add Savedreport > > and return to reportlist" > > Will reset the form to default (no comments etc.) And no reports are > > being saved... > > When I look at "list installed reports", there are no saved reports... > > > > Does someone have a clue what might go wrong here? > > > > We use Version 3.6.2 > > > > Kind regards, > > ___________________________________ > > Bart Lubberdink - RAM > > _______________________________________________ > > phpLogCon mailing list > > http://lists.adiscon.net/mailman/listinfo/phplogcon > > http://www.phplogcon.org > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org From B.Lubberdink at ram-it.nl Fri Feb 15 14:20:38 2013 From: B.Lubberdink at ram-it.nl (Bart Lubberdink) Date: Fri, 15 Feb 2013 14:20:38 +0100 Subject: [phpLogCon] reports problems In-Reply-To: References: Message-ID: Solved! Thanks! Never thought about that... :( IE9-64bit breaks this function.. Firefox works fine :) Kind regards, Bart -----Original Message----- From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon-bounces at lists.adiscon.com] On Behalf Of Andre Lorbach Sent: vrijdag 15 februari 2013 14:04 To: 'phplogcon at lists.adiscon.com' Subject: Re: [phpLogCon] reports problems Properly an issue with the browser you are using? Have you tried a different one? > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > Sent: Freitag, 15. Februar 2013 13:49 > To: 'phplogcon at lists.adiscon.com' > Subject: Re: [phpLogCon] reports problems > > Hello Andre, > > No, no luck. Saving a report with only defaults isn't working either. > > Kind regards, > Bart > > > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Andre Lorbach > Sent: vrijdag 15 februari 2013 12:30 > To: 'phplogcon at lists.adiscon.com' > Subject: Re: [phpLogCon] reports problems > > Hi, > > try to add a savedreport with default values, and let me know if this works? > If yes edit the savedreport afterwards, and verify if the comment or > filter variables are saved. > > Best regards, > Andre Lorbach > > > -----Original Message----- > > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > > Sent: Freitag, 15. Februar 2013 12:04 > > To: 'phplogcon at lists.adiscon.com' > > Subject: [phpLogCon] reports problems > > > > Hello, > > > > We have can't seem to save reports. > > Steps I take: Admin Center -> Report Modules -> Add SavedReport and > > save changes Then I enter a comment and on the filter string I add > "datelastx:3" > > All other things are kept default. > > > > Then, pressing "Add Savedreport and save changes" OR "Add > > Savedreport and return to reportlist" > > Will reset the form to default (no comments etc.) And no reports are > > being saved... > > When I look at "list installed reports", there are no saved reports... > > > > Does someone have a clue what might go wrong here? > > > > We use Version 3.6.2 > > > > Kind regards, > > ___________________________________ > > Bart Lubberdink - RAM > > _______________________________________________ > > phpLogCon mailing list > > http://lists.adiscon.net/mailman/listinfo/phplogcon > > http://www.phplogcon.org > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org _______________________________________________ phpLogCon mailing list http://lists.adiscon.net/mailman/listinfo/phplogcon http://www.phplogcon.org From B.Lubberdink at ram-it.nl Fri Feb 15 12:03:42 2013 From: B.Lubberdink at ram-it.nl (Bart Lubberdink) Date: Fri, 15 Feb 2013 12:03:42 +0100 Subject: [phpLogCon] reports problems In-Reply-To: References: Message-ID: Hello, We have can't seem to save reports. Steps I take: Admin Center -> Report Modules -> Add SavedReport and save changes Then I enter a comment and on the filter string I add "datelastx:3" All other things are kept default. Then, pressing "Add Savedreport and save changes" OR "Add Savedreport and return to reportlist" Will reset the form to default (no comments etc.) And no reports are being saved... When I look at "list installed reports", there are no saved reports... Does someone have a clue what might go wrong here? We use Version 3.6.2 Kind regards, ___________________________________ Bart Lubberdink - RAM From alorbach at ro1.adiscon.com Fri Feb 15 12:29:37 2013 From: alorbach at ro1.adiscon.com (Andre Lorbach) Date: Fri, 15 Feb 2013 11:29:37 +0000 Subject: [phpLogCon] reports problems In-Reply-To: References: Message-ID: Hi, try to add a savedreport with default values, and let me know if this works? If yes edit the savedreport afterwards, and verify if the comment or filter variables are saved. Best regards, Andre Lorbach > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > Sent: Freitag, 15. Februar 2013 12:04 > To: 'phplogcon at lists.adiscon.com' > Subject: [phpLogCon] reports problems > > Hello, > > We have can't seem to save reports. > Steps I take: Admin Center -> Report Modules -> Add SavedReport and save > changes Then I enter a comment and on the filter string I add "datelastx:3" > All other things are kept default. > > Then, pressing "Add Savedreport and save changes" OR "Add Savedreport > and return to reportlist" > Will reset the form to default (no comments etc.) And no reports are being > saved... > When I look at "list installed reports", there are no saved reports... > > Does someone have a clue what might go wrong here? > > We use Version 3.6.2 > > Kind regards, > ___________________________________ > Bart Lubberdink - RAM > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org From B.Lubberdink at ram-it.nl Fri Feb 15 13:49:03 2013 From: B.Lubberdink at ram-it.nl (Bart Lubberdink) Date: Fri, 15 Feb 2013 13:49:03 +0100 Subject: [phpLogCon] reports problems In-Reply-To: References: Message-ID: Hello Andre, No, no luck. Saving a report with only defaults isn't working either. Kind regards, Bart -----Original Message----- From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon-bounces at lists.adiscon.com] On Behalf Of Andre Lorbach Sent: vrijdag 15 februari 2013 12:30 To: 'phplogcon at lists.adiscon.com' Subject: Re: [phpLogCon] reports problems Hi, try to add a savedreport with default values, and let me know if this works? If yes edit the savedreport afterwards, and verify if the comment or filter variables are saved. Best regards, Andre Lorbach > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > Sent: Freitag, 15. Februar 2013 12:04 > To: 'phplogcon at lists.adiscon.com' > Subject: [phpLogCon] reports problems > > Hello, > > We have can't seem to save reports. > Steps I take: Admin Center -> Report Modules -> Add SavedReport and > save changes Then I enter a comment and on the filter string I add "datelastx:3" > All other things are kept default. > > Then, pressing "Add Savedreport and save changes" OR "Add Savedreport > and return to reportlist" > Will reset the form to default (no comments etc.) And no reports are > being saved... > When I look at "list installed reports", there are no saved reports... > > Does someone have a clue what might go wrong here? > > We use Version 3.6.2 > > Kind regards, > ___________________________________ > Bart Lubberdink - RAM > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org _______________________________________________ phpLogCon mailing list http://lists.adiscon.net/mailman/listinfo/phplogcon http://www.phplogcon.org From alorbach at ro1.adiscon.com Fri Feb 15 14:03:44 2013 From: alorbach at ro1.adiscon.com (Andre Lorbach) Date: Fri, 15 Feb 2013 13:03:44 +0000 Subject: [phpLogCon] reports problems In-Reply-To: References: Message-ID: Properly an issue with the browser you are using? Have you tried a different one? > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > Sent: Freitag, 15. Februar 2013 13:49 > To: 'phplogcon at lists.adiscon.com' > Subject: Re: [phpLogCon] reports problems > > Hello Andre, > > No, no luck. Saving a report with only defaults isn't working either. > > Kind regards, > Bart > > > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Andre Lorbach > Sent: vrijdag 15 februari 2013 12:30 > To: 'phplogcon at lists.adiscon.com' > Subject: Re: [phpLogCon] reports problems > > Hi, > > try to add a savedreport with default values, and let me know if this works? > If yes edit the savedreport afterwards, and verify if the comment or filter > variables are saved. > > Best regards, > Andre Lorbach > > > -----Original Message----- > > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > > Sent: Freitag, 15. Februar 2013 12:04 > > To: 'phplogcon at lists.adiscon.com' > > Subject: [phpLogCon] reports problems > > > > Hello, > > > > We have can't seem to save reports. > > Steps I take: Admin Center -> Report Modules -> Add SavedReport and > > save changes Then I enter a comment and on the filter string I add > "datelastx:3" > > All other things are kept default. > > > > Then, pressing "Add Savedreport and save changes" OR "Add Savedreport > > and return to reportlist" > > Will reset the form to default (no comments etc.) And no reports are > > being saved... > > When I look at "list installed reports", there are no saved reports... > > > > Does someone have a clue what might go wrong here? > > > > We use Version 3.6.2 > > > > Kind regards, > > ___________________________________ > > Bart Lubberdink - RAM > > _______________________________________________ > > phpLogCon mailing list > > http://lists.adiscon.net/mailman/listinfo/phplogcon > > http://www.phplogcon.org > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org From B.Lubberdink at ram-it.nl Fri Feb 15 14:20:38 2013 From: B.Lubberdink at ram-it.nl (Bart Lubberdink) Date: Fri, 15 Feb 2013 14:20:38 +0100 Subject: [phpLogCon] reports problems In-Reply-To: References: Message-ID: Solved! Thanks! Never thought about that... :( IE9-64bit breaks this function.. Firefox works fine :) Kind regards, Bart -----Original Message----- From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon-bounces at lists.adiscon.com] On Behalf Of Andre Lorbach Sent: vrijdag 15 februari 2013 14:04 To: 'phplogcon at lists.adiscon.com' Subject: Re: [phpLogCon] reports problems Properly an issue with the browser you are using? Have you tried a different one? > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > Sent: Freitag, 15. Februar 2013 13:49 > To: 'phplogcon at lists.adiscon.com' > Subject: Re: [phpLogCon] reports problems > > Hello Andre, > > No, no luck. Saving a report with only defaults isn't working either. > > Kind regards, > Bart > > > -----Original Message----- > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > bounces at lists.adiscon.com] On Behalf Of Andre Lorbach > Sent: vrijdag 15 februari 2013 12:30 > To: 'phplogcon at lists.adiscon.com' > Subject: Re: [phpLogCon] reports problems > > Hi, > > try to add a savedreport with default values, and let me know if this works? > If yes edit the savedreport afterwards, and verify if the comment or > filter variables are saved. > > Best regards, > Andre Lorbach > > > -----Original Message----- > > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- > > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink > > Sent: Freitag, 15. Februar 2013 12:04 > > To: 'phplogcon at lists.adiscon.com' > > Subject: [phpLogCon] reports problems > > > > Hello, > > > > We have can't seem to save reports. > > Steps I take: Admin Center -> Report Modules -> Add SavedReport and > > save changes Then I enter a comment and on the filter string I add > "datelastx:3" > > All other things are kept default. > > > > Then, pressing "Add Savedreport and save changes" OR "Add > > Savedreport and return to reportlist" > > Will reset the form to default (no comments etc.) And no reports are > > being saved... > > When I look at "list installed reports", there are no saved reports... > > > > Does someone have a clue what might go wrong here? > > > > We use Version 3.6.2 > > > > Kind regards, > > ___________________________________ > > Bart Lubberdink - RAM > > _______________________________________________ > > phpLogCon mailing list > > http://lists.adiscon.net/mailman/listinfo/phplogcon > > http://www.phplogcon.org > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org > _______________________________________________ > phpLogCon mailing list > http://lists.adiscon.net/mailman/listinfo/phplogcon > http://www.phplogcon.org _______________________________________________ phpLogCon mailing list http://lists.adiscon.net/mailman/listinfo/phplogcon http://www.phplogcon.org