[phpLogCon] reports problems

[Bart Lubberdink]

Solved! Thanks!
Never thought about that... :(

IE9-64bit breaks this function..
Firefox works fine :)

Kind regards,
Bart


-----Original Message-----
From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon-bounces at lists.adiscon.com] On Behalf Of Andre Lorbach
Sent: vrijdag 15 februari 2013 14:04
To: 'phplogcon at lists.adiscon.com'
Subject: Re: [phpLogCon] reports problems

Properly an issue with the browser you are using? Have you tried a different one? 

> -----Original Message-----
> From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- 
> bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink
> Sent: Freitag, 15. Februar 2013 13:49
> To: 'phplogcon at lists.adiscon.com'
> Subject: Re: [phpLogCon] reports problems
> 
> Hello Andre,
> 
> No, no luck.  Saving a report with only defaults isn't working either.
> 
> Kind regards,
> Bart
> 
> 
> -----Original Message-----
> From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- 
> bounces at lists.adiscon.com] On Behalf Of Andre Lorbach
> Sent: vrijdag 15 februari 2013 12:30
> To: 'phplogcon at lists.adiscon.com'
> Subject: Re: [phpLogCon] reports problems
> 
> Hi,
> 
> try to add a savedreport with default values, and let me know if this works?
> If yes edit the savedreport afterwards, and verify if the comment or 
> filter variables are saved.
> 
> Best regards,
> Andre Lorbach
> 
> > -----Original Message-----
> > From: phplogcon-bounces at lists.adiscon.com [mailto:phplogcon- 
> > bounces at lists.adiscon.com] On Behalf Of Bart Lubberdink
> > Sent: Freitag, 15. Februar 2013 12:04
> > To: 'phplogcon at lists.adiscon.com'
> > Subject: [phpLogCon] reports problems
> >
> > Hello,
> >
> > We have can't seem to save reports.
> > Steps I take:  Admin Center -> Report Modules -> Add SavedReport and 
> > save changes Then I enter a comment and on the filter string I add
> "datelastx:3"
> > All other things are kept default.
> >
> > Then, pressing "Add Savedreport and save changes" OR "Add 
> > Savedreport and return to reportlist"
> > Will reset the form to default (no comments etc.) And no reports are 
> > being saved...
> > When I look at "list installed reports", there are no saved reports...
> >
> > Does someone have a clue what might go wrong here?
> >
> > We use Version 3.6.2
> >
> > Kind regards,
> > ___________________________________
> > Bart Lubberdink - RAM
> > _______________________________________________
> > phpLogCon mailing list
> > http://lists.adiscon.net/mailman/listinfo/phplogcon
> > http://www.phplogcon.org
> _______________________________________________
> phpLogCon mailing list
> http://lists.adiscon.net/mailman/listinfo/phplogcon
> http://www.phplogcon.org
> _______________________________________________
> phpLogCon mailing list
> http://lists.adiscon.net/mailman/listinfo/phplogcon
> http://www.phplogcon.org
_______________________________________________
phpLogCon mailing list
http://lists.adiscon.net/mailman/listinfo/phplogcon
http://www.phplogcon.org